Buttons Labels - Insertion, Replacement - 2N Helios Vario Installation Manual

2.6 Buttons Labels – Insertion, Replacement
Instructions
1. Remove the
the screw as shown in the figure and take the cover off.
2. Remove the name plates as shown in the figure using, e.g., a screw driver.
3. Remove the name plate inserts as shown in the figure.
4. Insert the labels printed on foil (see later).
5. Replace the name plate inserts.
6.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Helios metal cover. To do this, use a hexagonal key, unscrew
34