Increase/Decrease The Speaker Volume During A Call; 9D24 Mkll Cordless Telephone; Turn Audible Signals On/Off; Lock/Unlock The Keypad - ASCOM 9d24 Mkll User Manual

User Manual

9d24 Mkll Cordless Telephone

3.10 Increase/Decrease the Speaker Volume during a Call

Press the upper part of the Volume button to increase the volume and press the lower
part to decrease the volume.

3.11 Turn Audible Signals On/Off

In stand-by mode a long press on the Mute button changes between audible signals on/
off and the icon appears/disappears. "Audio signal off" icon indicates a completely
silenced handset. Only highest priority messages will override this silent mode.

3.12 Lock/Unlock the Keypad

Press the Menu key
keypad" icon indicates a locked keypad. It is possible to lock the keypad during a call.
The keypad can also be locked automatically, see
Lock on page 42 for more information.

3.13 Lock/Unlock the Handset

You can protect your handset from being used by others by locking it automatically when
placed in a charger or switched off. The handset can only be unlocked with a 1 to 4 digit
code. When the handset is locked, it is still possible to send all types of alarms.
This function requires a SIM card parameter setting. The function can only be enabled/
disabled in the SIM card, not from the handset. The code is set in the SIM card and can be
changed from the handset, see
information.
The handset can also be locked manually, see
41 for more information.

3.14 Switch the Handset On

Press and hold the Call key
question is shown in the display window. The question is displayed for ten seconds.
How to switch the handset off is described in

3.15 Call menu

It is possible to program a Call menu via the SIM. The purpose of the Call menu is to
simplify exchange specific commands during a call. In the SIM card programmer the
different programmable options for the Call menu are described under the Settings\Call
menu folder.
During a call the Call menu is found on the left Soft key, "Options".
Only the programmed options will be visible in the menu. They will appear in an order
which can not be changed.
The following options are available in the Call menu (when programmed):
2007-02-07/ Ver. D
and then the -key to lock/unlock the keypad. The "Locked
8.5.13 Change the Lock Code
8.5.12 Lock the Handset Manually
until "Switch on?" is displayed. Press "Yes" while the
8.3.5 Switch the Handset Off
8.5.15 Turn On/Off Automatic Keypad
on page 41 for more
TD 92333GB
on page
on page 36.
14