Enable/Disable Quick Answer; Set New Messages To Be Displayed Upside Down; Set Owner Id; Select Pbx System - ASCOM 9d24 Mkll User Manual

User Manual
9d24 Mkll Cordless Telephone
2 Mark "General" and press Navigation key
3 Mark "Auto key lock" and press "Change". The Auto key lock checkbox is marked/
unmarked. In stand-by mode a locked keypad is indicated by the "Locked keypad"
icon.

8.5.16 Enable/Disable Quick Answer

1 Select the Settings tab
2 Step to "General" and press Navigation key
3 Press Navigation key
answer check box is marked/unmarked.

8.5.17 Set New Messages to be Displayed Upside down

1 Select the Settings tab
2 Step to "General" and press Navigation key
3 Press Navigation key
New message rotated checkbox is marked/unmarked.
When this parameter is set, the call information for incoming calls is also displayed upside
down.

8.5.18 Set Owner ID

1 Select the Settings tab
2 Step to "General" and press Navigation key
3 Step to "Owner ID" with Navigation key
4 Enter a name and press "Save". Change between upper and lower case by pressing
the -key on the keypad. The new ID is shown. The handset will automatically
return to the list of general settings.

8.5.19 Select PBX System

1 Select the Settings tab
2 Step to "System" and press Navigation key
3 Mark "Select system" and press Navigation key
4 Press Navigation key
is shown. The handset will automatically return to the system menu.
Select PBX System Set as a Hot key
If you are often moving between systems, it might be convenient to change system
quickly, therefore you can set this function as a Soft key, or Hot key.
To change systems: just press the pre-programmed Soft/Hot key to connect to the next
available PBX system (A, B, C or D). See
the system name.
8.6

Additional Information

To obtain general information about the handset select the Settings tab
menu. Press Navigation key
2007-02-07/ Ver. D
.
and press the Navigation key
.
and mark "Quick answer". Press "Change". The Quick
and press the Navigation key
.
, step to "New message rotated" and press "Change". The
and press the Navigation key
.
and press "Edit".
and press the Navigation key
.
or , mark system and press "Select". "System selected"
Rename a system
, step to "System" and press Navigation key
TD 92333GB
to enter Settings.
to enter Settings.
to enter Settings.
to enter Settings.
.
on page 44 on how to change
in the
. Press
42