Answer A Call - ASCOM 9d24 Mkll User Manual

User Manual
9d24 Mkll Cordless Telephone
It is possible to turn on/off the tone sender in a predialled number by making a long press
on the -key. Tone sender on will be indicated with a "T" in the number and off with "-
". If a pause is required in the number, it is added by making a long press on the #-key.
The pause is indicated with a "P" in the number.
Post-dial
Press the Call key
to the call list when post-dial is used.
Dial using a pre-programmed Hot key or Soft key
A Hot key or Soft key can be programmed with a telephone number. Press the pre-
programmed Hot key or Soft key. The call will automatically be connected.
Dial a number from the Call list
Enter the call list with Navigation key
the Call key
The number in the call list can be edited before the call is started. Press "Edit", make the
changes and press the Call key
Dial a number from a Message
You can dial a number included in a received message by pressing the Call key
first number in the message is dialled. If the message is stored in the message list, open
the list by pressing Navigation key
Dial a number from the Local Phonebook
1 Press the Menu key
2 Press Navigation key
3 Press Navigation key
4 Press Navigation key
5 Step in the list by using Navigation key
Press the Call key
Start a New Call during Conversation
Press the right Soft key "R" during a call. Dial the number you want. Wait for answer.
Switch between the connected calls by using the Soft key "R".
3.3

Answer a Call

The flashing LED, accompanied by a ring signal and/or a vibrating telephone, give you
notice of a call. Ring signal and vibrator can be disabled. If supported by your PBX, the
calling party's phone number and/or name is shown. The name will also be shown if the
calling party's phone number is stored in the Local phonebook. Press the Call key
answer the call. When a headset is connected to the handset, the answering button on
the headset can be used to answer the call.
You can also set other answering methods in the modes settings. The answering methods
are Ordinary, Auto, Loud and Auto loud. See
2007-02-07/ Ver. D
to get the line and enter the number. The number will not be added
.
.
. Select the message and press the Call key
(the last used tab is opened).
or and select the tab Contacts
and step to "Local Phonebook".
; a name list is shown.
.
, or from the menu. Select a number and press
or . The selected entry is highlighted.
8.3 Modes on page 34 for more
TD 92333GB
. The
.
.
to
12