Increase/Decrease The Speaker Volume During A Call; 3.1.10 Turn Audible Signals On/Off; 3.1.11 Lock/Unlock The Keypad; 3.1.12 Lock/Unlock The Handset - ASCOM 9d24 MkllMessenger User Manual

User Manual
9d24 Mkll Cordless Telephone
You can also activate this function by selecting another answering method, see
Choose the Modes Answering method
have three choices in the menu:
• Ordinary. The loudspeaking function is turned on when the middle Soft key is pressed
• Loud. A call is connected with the loudspeaking function turned on when the Call key
is pressed.
• Auto loud. An incoming call is automatically connected after 2 signals with the
loudspeaking function turned on. Calls can be answered as usual before that.
3.1.9

Increase/Decrease the Speaker Volume during a Call

Press the upper part of the Volume button to increase the volume and press the lower part
to decrease the volume.

3.1.10 Turn Audible Signals On/Off

In stand-by mode a long press on the Mute button changes between audible signals on/
off and the icon appears/disappears. "Audio signal off" icon indicates a completely
silenced handset. Only highest priority messages will override this silent mode.

3.1.11 Lock/Unlock the Keypad

Press the Menu key and then the *-key to lock/unlock the keypad. The "Locked keypad"
icon indicates a locked keypad.
The keypad can also be locked automatically, see
Lock on page 34 for more information.

3.1.12 Lock/Unlock the Handset

You can protect your Cordless Handset from being used by others by locking it
automatically when placed in a charger or switched off. The handset can only be unlocked
with a 1 to 4 digit code. When the handset is locked, it is still possible to send all types of
alarms.
This function requires a SIM card parameter setting. The function can only be enabled/
disabled in the SIM card, not from the handset. The code is set in the SIM card and can be
changed from the handset, see
information.
The handset can also be locked manually, see
33 for more information.

3.1.13 Switch the Handset On

Press and hold the Call key until "Switch on?" is displayed. Press "Yes" while the question
is shown in the display window. The question is displayed for ten seconds.
How to switch the handset off is described in
3.2

Messaging

Note: 9d24 Mkll Messenger and 9d24 Mkll Protector only.
2006-03-20/ Ver. PA8
PRELIMINARY
on page 29. For the loudspeaking function you
6.5.13 Change the Lock Code
6.5.15 Turn On/Off Automatic Keypad
on page 33 for more
6.5.12 Lock the Handset Manually
6.3.5 Switch the Handset off
TD 92333GB
6.3.4
on page
on page 29.
12