Downloading Software; Copying Software - ASCOM 9d24 Mkll User Manual

User Manual
9d24 Mkll Cordless Telephone
9.5.1

Downloading Software

To be able to download the 9d24 MkII software a Desktop Programmer for 9d24 is
needed. The desktop programmer is delivered with a Power Supply and a CD containing
required software and documentation.
Desktop Programmer for 9d24, EU
Desktop Programmer for 9d24, UK
Desktop Programmer for 9d24, AU
9.5.2

Copying Software

The 9d24 MkII software can be copied from one handset to another by using a modified
CR24 Charging Rack for 9d24. The charging rack can be ordered separately and
modified as described in the CR 24 Installation Guide
Charging Rack Module
Power Supply Module
Note: The Power Supply Module is adapted for the European market (UK excepted)
Copying procedure
1 Remove the battery pack on the master handset (i.e. the handset with the software
that is to be copied).
2 Press and hold down key 1 on the handset while replacing the battery pack again.
Do not release key 1 until "Wait..." appears in the display.
3 When "Wait... disappears, place the handset in the master slot on the charging
rack, see
4 Remove the battery pack on the slave handset (i.e. the handset that is to be
updated).
5 Press and hold down key 4 on the handset while replacing the battery pack again.
Do not release key 4 until "Load SW:...Exit" appears in the display.
2007-02-07/ Ver. D
figure 15 on page 50. Make sure that the handset locks into position.
Art.No: 651053
Art.No: 651074
Art.No: 651076
Art.No: 651062
Art.No: 651063
TD 92333GB
48