Answer A Call; End A Call; Transfer A Call; Turn Off Alert Signals At An Incoming Call - ASCOM 9d24 MkllMessenger User Manual

User Manual
9d24 Mkll Cordless Telephone
Dial a number from the Local Phonebook
Press the Menu key (the last used tab is opened). Use Navigation key (right/left) and select
the tab Contacts. Use Navigation key (down) and step to "Local Phonebook". Press
Navigation key (right); a name list is shown. Step in the list by using Navigation key (up/
down). The selected entry is highlighted. Press the Call key.
Start a New Call during Conversation
Press the right Soft key "R" during a call. Dial the number you want. Wait for answer.
Switch between the connected calls by using the Soft key "R".
3.1.3

Answer a Call

The flashing LED, accompanied by a ring signal and/or a vibrating telephone, give you
notice of a call. Ring signal and vibrator can be disabled. If supported by your PBX, the
calling party's phone number and/or name is shown. The name will also be shown if the
calling party's phone number is stored in the Local phonebook. Press the Call key to
answer the call. When a headset is connected to the handset, the answering button on
the headset can be used to answer the call.
You can also set other answering methods in the modes settings. The answering methods
are Ordinary, Auto, Loud and Auto loud. See
In the settings menu, you can enable Quick Answer, see
Answer on page 34.
3.1.4

End a Call

Press the Call key or place the handset in the charger. When a headset is connected to the
handset, the button on the headset can be used to end the call. All connected calls are
ended. The total call time is shown in the display.
3.1.5

Transfer a Call

Press the Soft key "R" during a call. Dial the number to the person you want to transfer
the call to. Wait for an answer and press the Call key.
In case the person you are trying to transfer the call to is not answering, you can take back
the call by pressing the Soft key "R" again.
3.1.6

Turn Off Alert Signals at an incoming Call

Press the Mute button before answering the call. All alert signals, including the vibrator,
will silence for that specific call.
3.1.7

Turn the Mute Mode during a Call Off/On

A press on the Mute button disconnects/connects the microphone. The text "Muted" is
shown in the display when the microphone is off during a call.
3.1.8

Loudspeaking Function

How you activate the loudspeaking function is dependent of the choice of answering
method. An incoming call can be connected with loudspeaking function active by pressing
Volume button (up) or middle Soft key. During a call, a press on the middle Soft key
activates the loudspeaking function. Press the middle Soft key again to turn it off.
2006-03-20/ Ver. PA8
PRELIMINARY
6.3 Modes
TD 92333GB
on page 28 for more information.
6.5.16 Enable/Disable Quick
11