Vivo STAND-V102L Instruction Manual

Pneumatic arm single monitor and laptop desk

Download this manual

Pneumatic Arm Single Monitor and Laptop Desk

Instruction Manual

SKU: STAND-V102L

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

https://vivo-us.com/products/stand-v102l

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com

Chat live with an agent!

309-278-5303

Need help?

Do you have a question about the STAND-V102L and is the answer not in the manual?

Page 1 Pneumatic Arm Single Monitor and Laptop Desk Instruction Manual SKU: STAND-V102L Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v102l GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
Page 2: Assembly Steps
ASSEMBLY STEPS WARNING! STEP 1 If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or Separate the clamp (B) using the 6mm defective parts.
Page 3 STEP 3 STEP 6 Attach the assembled laptop holder to the 75mm and 100mm holes on the VESA Slide the cable clip (F) and arm (A) down over the top of the pole (E). Tighten the bolt on plate (D) using the M4x8 bolts (P). the arm using the 6mm Allen wrench (L).
Page 4 STEP 11 STEP 9 Organize cables using the clips in the upper arms. Run cables through the lower arms and Release the locks on the underside of the laptop arms. Extend the arms, place laptop in the reattach the lower covers. holder, then adjust the arms to the width of the laptop.
Page 5 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! 309-278-5303 AVG. RESOLUTION TIME : 5M 4S (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...