1.1. Safety instructions
Read and understand the instructions of this manual, and be familiar with
relevant safety symbols in this chapter, then start to install and troubleshoot the
equipment.
According to the national and state requirements, before connecting to the
electrical grid, you must get permission from the local electrical grid operation
can only be performed by qualified electrical engineer.
Please contact the nearest authorized service center if any maintenance or
repair is needed.Contact your distributor for the information of the nearest
authorized service center. Do NOT repair it by yourself, it may cause injury or
property damage.
Before installing and maintaining the equipment, you should turn the DC
switch OFF to cut off the high voltage DC of the PV array. You can also turn the
switch in the PV combiner box OFF to cut off the high voltage DC. Otherwise,
serious injury may be caused.
Qualified persons
The customer must make sure the operator has the necessary skill and
training to do his/her job.Staff in charge of using and maintaining the equipment
must be skilled,aware and mature for the described tasks and must have the
reliability to correctly interpret what is described in the manual. For safety reason
only a qualified electrician, who has received training and / or has demonstrated
skills and knowledge in construction and in operation of this unit, can install this
inverter. Shenzhen SOFARSOLAR Co., Ltd does not take any responsibility for
the property destruction and personal injury because of any incorrect use.
Installation requirements
HYD 10-20KTL-3PH
1. Basic safety information
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 1 -
User manual
Need help?
Do you have a question about the HYD 10K-20KTL-3PH and is the answer not in the manual?