2
12) Display "MONITOR INFORMATION" of the OSM, and confirm that the model name (20WGX
) and
serial number have been correctly written. (Check that it is also in agreement with the written-in serial
number.) Model name and Serial number writing for the OSM "MONITOR INFORMATION".
9.4.2 EDID Data Inspection and Writing to the DVI-PC Connector
1) Connect the EDID data writing unit with jigs, etc. (Refer to a DVI connector connection figure)
2) The "BACK" button is pushed twice and the [MODEL SELECT] screen is displayed. Cursor is united
and double-clicked to [20WGX2 DVI-D].
3) 6) to 11) is carried out in the procedure of the 9.4.1 "EDID data inspection and writing of a D-SUB
connector".
4) Upon the normal completion of EDID data writing, press the [Exit] button to close the program.
5-28