NEC MultiSync 20WGX2 Series Service Manual page 43

■ F/W VER : Firmware version
■ F/W ID : Frimware ID
■ FACTORY PRESET :
Reset all items of Factory preset in user mode. Clear Reset-able Hours Running. Clear Auto Adjust
count. Clear First auto flag. Change OSD design to "Normal". Change Resolution Notifier to Enable.
Page 2
This page is used to adjust RGB offset and gain.
■ AUTO COLOR :
■ GAIN (R/G/B) :
■ OFFSET (R/G/B) : The manual adjustment of the preceding stage offset of analog input each color
Page 3
■ AUTO ADJUST COUNT : The total times of execution of automatic adjustment
(H. Position , V.Position , H.Size and Fine)
■ AUTO COLOR COUNT : The total times of execution of automatic adjustment
(Auto Contrast).
A gain and offset are auto adjusted.
The manual adjustment of the gain of analog input each color can be carried out.
( No adjustment need)
can be carried out.
( No adjustment need)
4- 6