Motor Control Shield for Arduino with BTN7030-1EPA
2
Motor Control Shield board description
For a safe and sufficient motor control design, discrete components are needed. Some of them must be
dedicated to the motor application and some to the NovalithIC™ Lite.
Figure 3, Figure 4 show the schematics plus the corresponding layout of the Motor Control Shield.
2.1
Schematics
In Figure 3 the schematics of the Motor Control Shield is shown. The schematics are based on the application
circuit in the
BTN7030-1EPA Data
Sheet.
Figure 3 Schematics Motor Control Shield for Arduino with BTN7030-1EPA
User Manual
6
Rev. 1.0
2021-01-21