Btn7030-1Epa Overview; Key Features Of The Btn7030-1Epa Novalith Ic - Infineon BTN7030-1EPA User Manual

Motor Control Shield for Arduino with BTN7030-1EPA
3

BTN7030-1EPA overview

The BTN7030-1EPA used in the Motor Control Shield is an integrated high current half-bridge for motor drive
applications. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level
inputs, diagnosis with current sense, dead time generation, short circuit detection and protection against
overtemperature, undervoltage, overcurrent and cross current.
The BTN7030-1EPA provides a cost optimized solution targeting low power (<15 A) DC motor applications with
0 – 2 kHz.
3.1

Key features of the BTN7030-1EPA Novalith IC™

Path resistance of max. 62 mΩ @ 150°C (typ. 32 mΩ @ 25°C)

High side: max. 25.5 mΩ @ 150°C (typ. 12 mΩ @ 25°C)

Low side: max. 36.5 mΩ @ 150°C (typ. 20 mΩ @ 25°C)

Current limitation level of 14 A @ 150°C, 17 A @ 25°C

Status flag diagnosis with current sense capability

Overtemperature shut down with latch behavior

Undervoltage shut down

Cross current protection

Open load in ON and OFF detection

Short circuit to GND and VBAT detection

Driver circuit with logic level inputs

Operation up to 28 V (normal operation 6V – 18V)

Green Product (RoHS compliant)

AEC Qualified in PG-TSDSO-14 package

User Manual 9 Rev. 1.0
2021-01-21