Chapter 3 Creating Jobs; Acquiring Images - Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet

3
CREATING JOBS
This chapter explains the settings required for creating a job as necessary.
Page 70 Acquiring Images
Page 71 Setting Regions
Page 79 Performing Calibration
Page 90 Procedure for Setting Commonly Used Functions
3.1

Acquiring Images

This section explains about image acquisition.
A function to acquire an image (AcquireImage function) is predefined in the A0 cell of a spreadsheet. It cannot be deleted and
moved.
When a function which requires an image structure is added in the spreadsheet, the A0 cell is automatically referenced from
the function.
This means that an image captured by a vision sensor can be utilized.
The following shows an example for the reference when an image filtering function is added.
Other than the cell explained above, a function that returns an image structure (such as an image filtering function and the
LatchImage function) can be referenced.
3 CREATING JOBS
70
3.1 Acquiring Images