3.
Select [Sensor] [Network Settings] in In-Sight Explorer.
4.
In the "Network Settings" screen, select "SLMP Scanner" in "Industrial Ethernet Protocols".
5.
Select the [Settings] button under "Industrial Ethernet Protocols".
6.
Set the following items in the [Settings] tab in the "SLMP Scanner Settings" screen.
Controller Type: PLC series of the programmable controller
IP Address: IP address of the programmable controller
Host Port: Port number of the programmable controller
Poll Interval: Applicable value (100 ms in the following screen)
2 BASIC OPERATIONS FOR SPREADSHEET
2.8 Establishing Communication
2
51