In I/Os - Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet

In I/Os

A vision sensor can be controlled and can control other devices by using the inputs and outputs of a built-in I/O and an I/O
module.
Controlling a vision sensor by the I/Os are shown below.
I/O
Input to a vision sensor
Output from a vision sensor
For details on the connection with a vision sensor, refer to the "Connection of a Breakout Cable" and "Connection of an I/O
Module" in the following manuals of the vision sensor used.
Vision Sensor VS70 User's Manual
Vision Sensor VS80 User's Manual
This section shows the procedure for controlling a vision sensor by the inputs and outputs of a built-in I/O using the following
device and application.
• Vision sensor VS70
• In-Sight Explorer
Control
Event driven in a spreadsheet
Job switching by a job ID number
Online or offline control
Image acquisition trigger control
Camera status output
Strobe signal output
Error output
Status output (offline or online)
Image acquisition output (start and complete)
Output from a spreadsheet
2 BASIC OPERATIONS FOR SPREADSHEET
2.8 Establishing Communication
2
59