Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet page 65

3.
To use the input 1, set the items in the "Property Sheet" screen as follows.
Start Bit: 1
Number of Bits: 1
When the ReadDiscrete function is placed, the MultiStatus function for visualizing input statuses is placed as well.
4.
Right-click the A8 cell and select [Cell State] in the shortcut menu.
5.
Select "Conditionally Enabled" in the "Cell State" screen.
6.
Click the [Select Cell] button, select the cell where the ReadDiscrete function is placed, and press the  key.
At this point, the DetectBlobs function is disabled as the vision sensor is offline and there is no data input.
2 BASIC OPERATIONS FOR SPREADSHEET
2.8 Establishing Communication
2
63