Switching Cell Statuses (Enable/Disable) - Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet

2.4

Switching Cell Statuses (Enable/Disable)

A cell status (enable/disable) can be changed for each cell.
It can be switched for a cell (function) that operates only on a specific condition.
This section explains how to switch the cell status using an example of a cell where a TrainPatMaxPattern function is placed.
In the following operation procedure, a model can be newly trained by using the Button function and making a cell of the
TrainPatMaxPattern function enable
*1 The TrainPatMaxPattern function makes the cell automatically disable after a model is trained and the "Property Sheet" screen is
closed. Without disabling the cell, a new model will be trained every time when the spreadsheet is updated.
Operating procedure
1.
Enter "Button" in a blank cell.
Alternatively, select [Functions] tab  "Graphics"  "Controls"  "Button" in the Palette window, and drag and drop it to
a spreadsheet.
2.
Enter a name in the "Property Sheet" screen.
3.
Select and right-click the cell where the TrainPatMaxPattern function is placed, and select [Cell State] in the shortcut
menu.
2 BASIC OPERATIONS FOR SPREADSHEET
24
2.4 Switching Cell Statuses (Enable/Disable)
*1
without opening the "Property Sheet" screen.