Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet page 67

Controlling outputs of a built-in I/O
The following shows the procedure for controlling output 0 and output 1 depending on the blob dimension (Page 62
Switching a cell status (enable/disable)) calculated by the DetectBlobs function.
Blob dimension
Less than 30000 pixels
30000 pixels or larger
Not detected
Operating procedure
1.
Enter the following formulas in each cell.
*1*2
A13: ErrFree(H8)
A14: If(A13 < 30000, If(A13 = 0, 0, 1), 0)
*4
A15: If(A13 >= 30000, 1, 0)
*1 Select [Functions] tab  "Mathematics"  "Lookup"  "ErrFree" in the Palette window, and drag and drop it to the H8 cell in the
spreadsheet.
*2 Blob dimension
*3 A formula for the output 0
*4 A formula for the output 1
Output 0
Output
Do not output
Do not output
*3
Output 1
Do not output
Output
Do not output
2 BASIC OPERATIONS FOR SPREADSHEET
2.8 Establishing Communication
2
65