Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet page 32

6.
Set a tolerance rate for the detection target in the trained pattern.
The screen below shows the default tolerance rate.
In the default, ±15° of angle change is allowed, and a scale change is not allowed.
The tolerance rate should be changed depending on the detection target or installation environment of a vision sensor.
For details, refer to [Help] ( ) in the "Property Sheet" screen.
The items are displayed in the spreadsheet as follows.
(1)
(1) Vision tool function
(2) Vision data access function
When using a coordinate detected in the FindPatMaxPatterns function as a fixture for another function, apply
values of row, column, and angle of a vision data access function.
(A fixture detects the feature of an object, and focuses an area to inspect in other vision tool functions.)
2 BASIC OPERATIONS FOR SPREADSHEET
30
2.5 Using Functions
(2)