Mitsubishi Electric MELSENSOR VS70 Series Setting Manual / Spreadsheet page 107

■Program description
(1) Use the TrainPatMaxPattern function to train a pattern model.
Surround a pattern to be trained in "Pattern Region" (Figure 4). Pattern origin is positioned at the center of the pattern region
when the origin is not specified. Set "Pattern Origin" as necessary.
Figure 4 Trained model
(2) Use the FindPatMaxPatterns function to search the shape of a model trained.
Specify a cell of the TrainPatMaxPattern function for "Pattern." Specify the number of works to be detected simultaneously in
"Number to Find." Additionally, select the checkbox of "Clutter in Score" to adjust "XY Overlap" to detect overlapping works. In
this example, set 6 for "Number to Find," and 95 for "XY Overlap." When the angle of the works is not determined, set the
"Angle Start" and "Angle End" of find tolerances to -180 and 180 respectively to detect the works positioned at any angles
(Figure 5).
Figure 5 FindPatMaxPatterns function property sheet
APPX
Appendix 1 Sample Program
A
105