Maintenance - Demtech Pro-X5 600-0105/X5/A Operator's Manual

Rev. A: January 2015
The technician assigned to operate this welder must have read through and become familiar
with this manual, particularly all safety information, before using the Pro-X5.
No changes and/or modifications should be made to the Pro-X5 especially as it relates to safety.
1.2.

Maintenance

Maintenance, inspection and adjustment of the Pro-X5 may only be carried out by qualified
personnel. Before removing or installing spare parts or performing any other repair operations
to the welder consult DEMTECH Services, Inc. or your authorized DEMTECH service center
for advice on proper procedures. This will help insure a safe and successful outcome. Always
make sure all screw connections are tight before attempting to operate the welder after
maintenance and/or repair procedures have been performed. Make sure all covers, guards and
other safety devices have been fully reinstalled before use.
Page 2 Pro-X5 Operator's Manual 600-Manual_Pro-X5 RA.docx