Demtech Pro-X5 600-0105/X5/A Operator's Manual page 3

Rev. A: January 2015
© Copyright 2015 by DEMTECH Services, Inc.
The text of this publication, or any part thereof, may not be reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopying, recording, storage in an
information retrieval system, or otherwise, without prior written permission of DEMTECH
Services, Inc.
Any firmware and/or software program contained within the Pro-X5
is protected by copyright laws that pertain to computer firmware and/or software. Use of this
firmware and/or software does not authorize de-compiling, disassembling or reverse engineering
to gain access to the program code. DEMTECH Services, Inc. does not authorize any copying,
changing, or other use of this firmware and/or software.
Patents have been granted and/or patent applications are pending or are in the process of
preparation on all DEMTECH Services, Inc. developments.
The material in this manual is for informational purposes only and is subject to change without
notice.
DEMTECH Services, Inc. assumes no responsibility for any errors that may appear in this manual.
600-Manual_Pro-X5 RA.docx
All Rights Reserved
Notice
Printed in the USA
Manual Number: 600-Manual/Pro-X5, Rev. A
DEMTECH Services, Inc.
Ship to address: 6414 Capitol Avenue
Diamond Springs, CA 95619 U.S.A.
Telephone: (530) 621-3200
Toll Free: (888) 324-9353
Fax: (530) 621-0150
Web Site: www.demtech.com
TM
Pro-X5 Operator's Manual
for operation of the welder
iii