General Product Data; Operating Environment - Demtech Pro-X5 600-0105/X5/A Operator's Manual

Rev. A: January 2015

2. General Product Data

The DEMTECH Services, Inc. Pro-X5
as the Pro-X5 or welder, dramatically speeds the welding of plastic sheet materials utilizing molten
plastic. This function, combined with its simple construction and easy-to-use controls, makes
performing welding tasks very efficient. With minimal setup, the welder speeds up processing
time; while providing a very rugged and reliable welder. You can be assured the Pro-X5 has been
built using the highest quality materials available which include billet aluminum, stainless steel
and ground and hardened steel. DEMTECH Services, Inc. strives to make our welders easy to use
and built to last. Just like all other DEMTECH Services, Inc. products, even a first time user will
be productive in minutes.

3. Operating Environment

The Pro-X5 is intended to be operated within the following environmental conditions. Operating
the welder in environments which are less than, or greater than nominal can degrade and/or
adversely affect performance.
Temperature .................................+32 to +100°F; 74°F Nominal (+0 to +38°C; 23°C Nom)
Humidity
(non-condensing) ................
Elevation ......................................0 to 7,000 Ft; 2,000 Ft Nominal
......................................................(0 to 2,134 meters; 610 meters Nominal)
600-Manual_Pro-X5 RA.docx
Thermoplastic Extrusion Welder, hereinafter referred to
TM
0 to 90%; 45% Nominal
Pro-X5 Operator's Manual Page 3