DL-10 – RS-485 Remote Temperature and Humidity
Configuration
After click the "Configuration" tab will display the configuration page allowing you to configure
the settings for DL-10, including the Address, Baud Rate and Data Format.
The following is an overview of the parameters:
Item
Address
Baud Rate
Parity
Set Module Configurations
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
Description
Set the device ID for the DL-10.
Set the Baud Rate for the RS-485 Port.
Set the Data Format for the RS-485 Port.
Click this button to save the revised settings to the DL-10.
- 14 -