Festo CPX-E Series Description page 18

3 Parameterisation
Slot 2: Channel-specific module parameters
Index Name
16 Fault mode
17 Fault state
18 Force mode Outputs
19 Force state Outputs
20 Force mode Inputs
21 Force state Inputs
22 Global operating system data
1) r = read access; w = write access
2) Siemens S7: "S7-compatible" parameter setting
Tab. 3.2
The data records (system parameters, module data and module parameters) can be read and written indirectly at
Slot 3.
For this purpose, the command box is assigned a slot number, index number and offset (Byte 4 is reserved).
Read and write procedures can be performed using Read Box and Write Box.
Slot 3: Indexed addressing of the objects
Index Name
16 Command box
17 Read Box
18 Write Box
1) r = read access; w = write access
2) Siemens S7: "S7-compatible" parameter setting
Tab. 3.3
Slots 100 ... 147: Module data and module parameters
Index Name
16 Module configuration
17 Module serial number
18 Diagnostic data module
19 Reserve
20 Set module configuration
21 Module parameter
22 Module parameter sets
23 Diagnosis of all input channels
24 Diagnosis of all output channels
25 Module Fault mode
26 Module Fault state
27 Module forcen: Outputs
28 Module forcen: Outputs
29 Module forcen: Inputs
30 Module forcen: Inputs
1) r = read access; w = write access
2) Siemens S7: "S7-compatible" parameter setting
3) m = Module number
Tab. 3.4
18
1)
Length Access Data record
[byte] number
64 r 2
64 r 3
64 r 4
64 r 5
64 r 6
64 r 7
40 r 8
1)
Length Access Data record
[byte] number
4 r/w 9
64 r 10
64 w 11
1)
Length Access Data record
[byte] number
16 r/w 72
4 r 73
4 r 74
4 r/w 75
8 r/w 76
64 r/w 77
16 r 78
64 r 79
64 r 80
64 r/w 81
64 r/w 82
64 r/w 83
64 r/w 84
64 r/w 85
64 r/w 86
Festo – CPX-E-PB-EN – 2017-07 – English
Function number
2)
3888
3952
4016
4080
4144
4208
4792
Function number
2)
–
–
–
3)
Function number
2)
16 + 16m
784 + 4m
2008 + 4m
3224 + 4m
4408 + 8m
4828 + 64m
976 + 16m
–
–
–
–
–
–
–
–