General Instructions; Safety Instructions; Warnings - Provision ISR ZP-20A-2(IR) User Manual

1 General Instructions:

1.1 Safety Instructions:

◆
Make sure to read the user manual before using the camera.
◆
Always follow national and local safety codes during the installation.
◆
Only a qualified and experienced person can carry the installation and
maintenance for this camera.
◆
Use reliable tools.
◆
Make sure that the environmental conditions meet the installation
requirements for this product.
◆
Please check the space and toughness of the installation surface before
installation. It should be able to bear 4 times the weight of the camera
and its accessories.

1.2 Warnings:

◆
Do not install this speed dome in hazardous places where combustible
or explosive materials are stored or used.
◆
Do not install on a platform that suffers from constant vibrations.
◆
Make sure no object or fluid substances get inside the unit.
◆
ZP-20A-2(IR) runs on AC24V and ZE-20A-2(IR) runs on DC12V. Do not
connect it to a different voltage.
◆
Do not turn the power on before installation is complete.
◆
Do not disassemble any part of the camera.
◆
Use a soft towel to clean the down the lenses when necessary, do not
use caustic detergent.
◆
To protect the image sensor, avoid facing the camera directly into a
strong light.
◆
To prevent damage, do not drop the unit or expose to strong shocks or
vibrations.
◆
Make sure no object is blocking the unit's full range of motion.
3