Table of Contents
Advertisement
⚫
<WDR>: Turning Digital WDR effect ON/OFF
⚫
<2D-NR>: Adjusting the level of 2D-NR noise reduction
⚫
<3D-NR>: Adjusting the level of 3D-NR noise reduction
⚫
<BLC>: switching OFF/ON.
⚫
<WB>: White Balance is normally compensated for by the automatic
white balance gain control. In some lighting conditions, the user may
want to manually adjust the red and blue settings for optimal viewing.
There are 6 options:
⚫
[AUTO]: Auto White Balance (default setting).
⚫
[ATW]: Auto track White Balance.
⚫
[PUSH]: Once touch White Balance
⚫
[OUTDOOR]: Suitable for outdoor use.
⚫
[INDOOR]: Suitable for indoor use.
⚫
[MANUAL]: Manually set the red and blue values
⚫
<BGAIN>: Set the blue value (Only effective if WB is set to Manual)
⚫
<RGAIN>: Set the red and value (Only effective if WB is set to Manual)
⚫
<DE-FOG>: Change the level of defog effect.
⚫
<OUTPUT>: Manually set the output between AHD / TVI / CVBS
⚫
<FORMAT>: Manually set the output between 25&30 (PAL/NTSC)
⚫
<ZOOM>: Do Not Change.
⚫
<FOCUS>: Do Not Change
⚫
<F-RANGE >: Do Not Change
⚫
<RESET >: Reset All settings to factory Default
20
Advertisement
Table of Contents
Need help?
Do you have a question about the ZP-20A-2(IR) and is the answer not in the manual?
Questions and answers