Table of Contents
Advertisement
PATTERN NO:1
START
(SET)
DELETE
BACK
The dome supports 4 pattern tours and each pattern cover at most 10
Minutes of 500 commands. Please check the following steps to set up a
pattern.
1)
PATTERN NO.: Move the cursor here and press IRIS OPEN to enter the
setup of Pattern Number. Move the joystick to select a pattern number
(14) and press IRIS OPEN to confirm.
2)
START: Move the cursor here and press IRIS OPEN to start the current
pattern tour.
3)
<SET>: Move the cursor here and press IRIS OPEN to enter. Move the
dome up/down/left/right, make the zoom in/out and press IRIS OPEN to
save the pattern tour.
4)
DELETE: Move the cursor here and press IRIS OPEN to delete the current
pattern tour.
4.5 Advanced Camera Menu:
For advanced Menu, Call preset #69.
PLEASE NOTE: Scrolling and changing values in the advanced menu is done
with different controls:
1)
The controller joystick has no effect.
2)
Scrolling up and down is done by pressing IRIS+/IRIS-
3)
Changing Values of the selected feature is done by pressing
ZOOM+/ZOOM-
PATTERN
EXIT
18
Advertisement
Table of Contents
Need help?
Do you have a question about the ZP-20A-2(IR) and is the answer not in the manual?
Questions and answers