Stopping The Engine - Kioti NX4510 Owner's Manual

Hide thumbs Also See for NX4510:
Table of Contents

Advertisement

OPERATION
CHECKING CHECK LAMPS
1, If the oil pressure warning lamp (2)
does not go off in 4 to 5 seconds
after the engine is properly started,
stop the engine immediately and
check the engine oil level. If the
engine oil level is proper, contact
your local KIOTI Dealer.
WARNING
The engine can be severely
damaged if it is run with the oil
pressure warning lamp ON.
2.If the charge warning lamp (3)
does not go off in 4 to 5 seconds
after the engine is properly started,
it means that the battery is not be-
ing charged. Have the charging
system, such as the battery and
alternator, serviced.
3. Refer to "Instrument panel" in
chapter 4 for detailed information
about other indicators and lamps.
WARNING
If driving the tractor for an ex-
tended period of time with the
charge warning lamp ON, the
battery can be discharged and
the tractor's electrical system
can be damaged.
STOPPING THE ENGINE
1. Make sure to reduce the engine
rpm before stopping the engine.
2. Depress the clutch pedal and put
all shift levers in the neutral posi-
tion.
3. Run the engine at the idle speed
for approx. 2 to 3 minutes, and
then turn the key switch to the
"OFF" position to stop the engine.
4. Remove the ignition key.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx5010Nx5510Nx6010

Table of Contents