Low Speed Indicator Switch (If Equipped) - Kioti NX4510 Owner's Manual

NX4510/NX5010/NX5510/NX6010
ROPS
(1) PTO Auto / Manual Selection Switch
(2) PTO ON/OFF Switch (A) Automatic
(B) Manual (C) ON (D) OFF
ing arm (or Implement) is lifted by
the position control lever.
2. PTO Manual
When the PTO selection switch is
put to the manual operation posi-
tion, the PTO is operated regard-
less of the height of the lifting arm
(Implement).
3. PTO ON/OFF
When engaging the PTO, press
the upper part of the switch (2).
When disengaging it, press the
lower
part
of the switch (2).
0 IMPORTANT
• When engaging the PTO, low-
er the engine speed, engage
the PTO, and then accelerate
the tractor gradually in order
to prevent impact load to the
PTO from abrupt operation.
tj
NOTE
• The mark "A" on the tachometer
indicates 540 rpm of the PTO.
LOW SPEED INDICATOR SWITCH
(IF EQUIPPED)
(1) Low Speed Indication Switch
When driving the tractor after sunset, be
sure to turn on the low speed indicator.