Kioti NX4510 Owner's Manual page 150

0 IMPORTANT
• For the manual model, it can-
not be started while the shuttle
lever or PTO is engaged.
OPERATION
(1) Key Sw 'ch
(A) Pre-heat (B) (:) Stop
(C) ACC (D) ) ON
(E) Start
8. Insert the key into the key switch
and turn it "ON". Maintain it until
the preheat lamp is turned off. (Ap-
prox. 8 sec)
0 IMPORTANT
Start Condition (HST): Opera-
tor on the seat + Depressing
brake pedal. (Range shift le-
ver, PTO and Mid PTO levers
should be in neutral position)
Start Condition (Mechanical):
Operator on the seat + De-
pressing brake pedal. (Shuttle
lever, PTO and Mid PTO levers
should be in neutral position)
• Operation continuance con-
dition when operator leaves
from the seat: Parking brake
ON + Shuttle (HST) lever is in
neutral position.
In any other condition, the
tractor stops operation by it-
self in 2 sec of time delay.