Tread - Kioti NX4510 Owner's Manual

NX4510/NX5010/AIX5510/NX6010
TREAD
(1) Bolt
(2) Rim Bolt (3) Disc
T46W0 31 A
A
WARNING
▪ Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
• Check tires for inflation pres-
sure, damage, deformation,
and extended wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
When working on a field where crops
are linearly aligned, the tread should
be adjusted so that the tires do not
cross over the crops.
It is also necessary to widen wheel
tread to decrease danger when work-
ing on slopes or hills, or when doing
trailer work, etc.
A
WARNING
Never operate tractor with a
loose rim, wheel, or axle.
• Always tighten nuts or bolts
to the specified torque.
A
Make sure to frequently check
that all these parts are firmly
tightened. Make sure to perm
form inspection daily.