Otto Bock 6A53 Instructions For Use Manual page 14

tested modular components in accordance with the MOBIS Mobility System.
The manufacturer is not liable for damage caused by component combina­
tions that were not authorised by the manufacturer.
7.2 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for med­
ical devices. This device has been classified as a class I device according to
the classification criteria outlined in appendix IX of the guidelines. The
declaration of conformity was therefore created by the manufacturer with
sole responsibility according to appendix VII of the guidelines.
7.3 Warranty
The manufacturer warrants this device from the date of purchase. The war­
ranty covers defects that can be proven to be a direct result of flaws in the
material, production or construction. Because warranty conditions may differ
by country, please contact your local manufacturer distribution company for
more information.
8 Technical Data
Reference number
Weight [g]
System height [mm]
Material
Max. displacement [mm]
Max. body weight [kg]
1 Description du produit
INFORMATION
Date de la dernière mise à jour : 2012-12-11
► Veuillez lire attentivement l'intégralité de ce document.
► Respectez les consignes de sécurité.
1.1 Conception et fonctionnement
Les adaptateurs de translation 6A53 et 6A54 permettent de déplacer parallè­
lement les composants distaux de la prothèse modulaire, peu importe
l'angle réglé par les pyramides de réglage. Les réglages peuvent être effec­
tués soit au niveau frontal (médial ou latéral) soit au niveau sagittal (antérieur
14 | Ottobock
6A53 6A54
180
-16
Aluminium
20
125
33
Français