Table of Contents
Advertisement
7800 Series
Mortise Lock with PT Paddle Trim
Installation Instructions
7
7800 PT Multi Function Lock Instruction (continued)
c
How to Change Hand of Lock
NOTE: Red surface of locking piece must face secure
(keyed/locked) side of door.
To rotate locking piece:
1. Position lockbody with red surface of locking piece visible.
2. Insert blade type screwdriver into locking piece slot to rotate
locking piece.
3. Push locking piece toward back of lock body and rotate 180°
until RED surface shows on opposite side.
NOTE: 04, 06, 13, 17 and 31 Functions require:
(a) Green catch screw to be removed.
(b) Rotate hub 45° to vertical position.
(c) Rotate locking piece for required hand.
(d) Red surface faces locked side of door.
(e) Rotate hub to the original 45° position as shown on lock-
case.
(f) Green catch screw is then reinstalled.
NOTE: Beveled surface of latch must face strike. The deadlatch is self
adjusting. To change hand of latch:
1-800-727-5477 • www.sargentlock.com
Copyright © 2011, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
2. Rotate screwdriver 90º to push latch out
until back of latch clears lock front. Then
rotate latch 180º. Latch will then re-enter
lockbody. (Note: Latch can not be un-
screwed)
6
A8130D 02/20
Advertisement
Table of Contents
