7800 Series
Mortise Lock with PT Paddle Trim
Installation Instructions
TOC
Table of Contents
1
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Installation of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3
Installation of Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4
5
Installation of Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
6
7
b
Item Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
How to Change Hand of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1
Tools Required
• Phillips Screwdriver #2
• Drill
• 7/46" Drill Bit (Wood Door)
• #8-32 Tap (Metal Door)
• 0.136 (#18) Tap Drill
2
Installation of Lock
• Slide Lock into the door.
• Secure lock in door with (2) wood screws #12
x 1-1/4" or machine screw #12-24 x 1/2".
• Do not tighen screws fully at this point.
1-800-727-5477 • www.sargentlock.com
Copyright © 2011, 2020, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
• Screw Pack with screws for lockbody, fronts &
strike screws (part #77-4236)
• T15 Torx Bit
• 1/8" Allen Key
2
.
A8130D 02/20