Advertisement
User manual / Bedienungsanleitung
2.)
To adjust the pivot of the tonearm Clearaudio recommends the Clearaudio
(Art. No.: AC005/ IEC; also available at www.analogshop.de).
Make sure that the distance from the spindle to the pivot point (center) of the tonearm (9 ") is exact
222 mm ( for Universal 12" = 295 mm) . When moving the armboard in one or another direction
you can set the correct distance. After distance is adjusted, tighten the screws of the armboard.
Pic. 6a: Distance from spindle to pivot 222 mm /
Pic. 6b: Distance from spindle to pivot 295 mm /
Adjustment of the tonearm height w ith
Please follow hereby the user manual of the
The height of the tonearm ist adjusted correct, if the upper side of the mounted cartridge is parallel
to the surface of the record (when the cartridge is lifted down).
Made in Germany
222mm
Universal 9"
295mm
Universal 12"
VTA-Lifter
VTA-Lifter
IEC alignment gauge
:
.
7
Advertisement
