Advertisement
User manual / Bedienungsanleitung
Please note:
This drilling template is only for
Universal
pivot to spindle for
1) .
into the drilling of the tonearm base. Lock the
VTA-Lifter
Slide the
side of the tonearm base (pic. 4 and 5).
Pic. 4: Setup of tonearm base with
To adjust the height of the tonearm in the
After adjustment of the tonearm height tighten the screw again.
Pic. 5: Adjustment of the height of tonearm with
6
9 inch tonearms. You will find the the correct
Universal
12 inch in the technical data on page 13.
VTA-Lifter
VTA-Lifter
VTA-Lifter
VTA-Lifter
with the screws on the
VTA-Lifter
lift the
up and loosen the screws.
© clearaudio electronic GmbH, 2018/ 11
Advertisement
