Advertisement
User manual / Bedienungsanleitung
1.)
Tighten the mounting plate for the
base. Please take the delivered screws.
Feed the tonearm cable through the mounting plate and slide the tonearm feet through the drilling
of the mounting plate.
Pic. 9: Placing the tonearm
2.)
To adjust the pivot of the tonearm Clearaudio
recommends the Clearaudio
gauge
(Art. No.: AC005/ IEC; also available at
www.analogshop.de).
Make sure that the distance from the spindle to
the pivot point (center) of the tonearm is exact
222 mm ( Universal 9") or 295 mm
( Universal 12") .
When moving the armboard in one or another
direction you can set the correct distance.
After distance is adjusted, tighten the screw of
the armboard.
Made in Germany
Universal
tonearm with the screws onto the mounted tonearm
IEC alignment
295mm
( Universal 12")
Pic. 10: Distance from spindle to the pivot (222 mm/ 295 mm)
222mm
( Universal 9")
9
Advertisement
