Quicklock Face Rest - OAKWORKS WOMEN’S IMAGING Instruction Manual

DIRECTIONS FOR USE
NOTE:
You will need
an accessory mounting
plate in order to use the

QuickLock face rest.

IMPORTANT
SAFETY NOTE:
Do Not extend the dowels
of the Face Rest further than
3" from the table outlets to
ensure a stable connection.
CAUTION
Do not put excessive weight
or pressure on the face rest.
QUICKLOCK FACE REST
Double articulating action provides nearly limitless positioning options
with the QuickLock Face Rest. The adjustable pad takes pressure off
™
sensitive facial areas while providing superb support. The QuickLock
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking the cam
locks into that position.
To remove the QuickLock
the end of the table until it comes free. When replacing the QuickLock
Face Rest, just push the frame back into the outlets being sure to keep
the dowels within 3" of the table to ensure a stable connection.
use & care instructions see product instructions "QuickLock Face Rest
instructions"
QuickLock™
Face Rest
Insert dowels
Loosen Cam Locks
into Accessory
& adjust face rest
Mounting Plate
into place.
Face Rest, just pull the frame from the outlets in
™
Important Safety Note: Maximum
Distance from edge of Table = 3"
Tighten
Cam Locks.
* U.S. Patent #5,177,823
™
™
For complete
The Face Rest can
be used for either
prone or supine
positioning.
22