Table of Contents
Advertisement
Setting specific features
8.2
Switching on power save mode
The power save mode will reduce the energy consumption of the
Minoltafax 1100 in standby mode from approx. 5.7 W to approx. 1.7 W.
The power save mode will activate itself if during the last 5 minutes:
G
A key has not been pressed
G
An incoming call has not been received
G
The handset of your fax machine or a connected telephone was not
lifted off the hook.
The display will show POWER SAVE.
If any of the above requirements is not fulfilled, your fax machine will
automatically switch over to normal standby mode.
The power save mode can be switched on or off via software switch 13.
The default setting of software switch 13 is 01 (ON).
For detailed information concerning the use of software switches, please
consult page 8-1.
Rev. 1.1.1/07.06.99
‘‘ POWER SAVE ‘‘
MF 1100
8
8-5
Advertisement
Table of Contents
