Table of Contents
Advertisement
RollCall Control Panel
SFP Configuration Page
SFP Configuration Page
The SFP Configuration page allows various SFP parameters to be adjusted, if required.
SFP Configuration Page
The majority of SFPs will operate correctly with IQMIX modules without any need for
adjustment. Some, however, may need to have module parameters set a little differently.
If difficulties are encountered with an SFP not working as expected, follow these instructions:
96
1 Select the appropriate SFP type from the SFP Database List, and click Take. Verify whether
the SFP is now working correctly; if so, no further action is required.
2 If the SFP is still not working properly, select Custom from the SFP Database List. This
allows all the parameters shown to be adjusted as required. Make changes and click Take
to apply them.
3 When a working configuration is found, the parameter values can be saved by clicking S
beside each field.
Advertisement
Table of Contents
