Table of Contents
Advertisement
RollCall Control Panel
Logging - SDI Info
Logging - SDI Info
Information on various parameters can be made available to a logging device connected to the
RollCall network. Each logging page comprises three columns:
The information below describes the various parameters available for logging.
Logging - SDI Info Page
The following options are available. Enable check boxes to activate log fields as required.
Log Field
INPUT_N_CHANGE_TIME=
INPUT_N_SDI_CHANGE_CNT=
Where N is the input number
72
• Log Enable - Select the check boxes that correspond to the parameters for which log
information should be collected.
• Log Field - Displays the name of the logging field.
• Log Value - Displays the current log value.
Description
Logs time that SDI input changed.
Logs number of times that the SDI input has changed.
Advertisement
Table of Contents
