Table of Contents
Advertisement
IQFAN00 Cooling Fan Module
IQMIX25/26/40/41 cards are supplied with IQFAN00 cooling modules. Ensure these are fitted
according to the instructions below.
Front
View
Rear
View
IQFAN00 Cooling Module
IMPORTANT
Do not run IQMIX cards without the fan modules. This can cause severe
damage to the equipment.
Fitting the Fan Module
A fan module must be fitted immediately to the left of each IQMIX card, as viewed from the
rear.
IMPORTANT
Before performing this operation, ensure that the power supply is
switched OFF and the mains power connection at the rear of the unit is
removed.
1 Choose an empty slot position for the module, immediately to the left of the IQMIX as
viewed from the rear.
2 Remove the screws securing the blanking plate covering the chosen slot position. Remove
and store the blanking plate in a safe place for future use.
3 Ensuring correct orientation, fit the fan module rear connecting panel to the rear of the
enclosure in the vacant aperture, and secure with the fixing screws provided.
4 Reattach the power supply and start up the enclosure. The fan should start immediately.
IQMIX25/40
User Manual
25
Advertisement
Table of Contents
