Logging - Card Diagnostics
Information on several parameters can be made available to a logging device connected to the
RollCall network. Each logging page comprises three columns:
Logging - Card Diagnostics Page
RollTrack Source
NVRAM_FS=
TOTAL_AVAILABLE_
MEMORY=
TOTAL_USED_MEMORY=
NUM_CORE_DUMPS=
LAST_CORE_DUMP_NAME=
LAST_CORE_DUMP_TIME=
PWRSAVE_MEMORY_
RESTORE=
PMIC_VERSION=
Where N is the input number
• Log Enable - Select the check boxes that correspond to the parameters for which log
information should be collected.
• Log Field - Displays the name of the logging field.
• Log Value - Displays the current log value.
Description
Reports NVRAM file system.
Reports total amount of CPU memory available.
Reports total amount of CPU memory used.
Reports number of core dumps performed by the module.
Reports name of last core dump performed by the module.
Reports time of last core dump performed by the module.
Reports whether the power-safe memory facility is working
correctly. Possible values are:
• OK
• FAIL
Reports version of the PMIC chip fitted to the module.
IQMIX25/40
User Manual
87