Table of Contents
Advertisement
Feature Summary
IQMIX25 3G/HD/SD-SDI Multi-channel IP Transceiver
IQMIX40 3G/HD/SD-SDI Multi-channel IP Transceiver
• Handles up to 16 SDI signals over dual 10GbE or 25GbE IP links (dependent on SDI signal
format and compressed/uncompressed transport mode).
• Supports configuration of Ethernet links for maximum signal transport using both SFPs, or
for dual link mode to provide link redundancy as per SMPTE 2022-7.
• Multiple transport types available for each SDI input, including:
• Compressed IP transport using SMPTE-2042 (VC2) low latency high quality encoding
profile.
• Uncompressed video transport using either ST2110-20 or SMPTE-2022-6
encapsulation.
• PCM audio using ST2110-30.
• ST2110-40 metadata support.
• Timing and synchronization provided by IEEE-1588v2 (PTP), or via the IQH3B/IQH4B frame
analog reference bus.
• Supports unicast as well as IGMPv3 source-specific multicast, allowing point to point
operation or transmission in multicast groups.
• Standards supported:
• 3G-SDI to SMPTE 424M/425M level A compatible.
• HD-SDI to SMPTE292M/274M/296M.
• SD-SDI to SMPTE259M-C.
• 25GbE Ethernet to IEEE 802.3.
• RollCall control and monitoring compatible, with standard logging and reporting features.
• Handles up to 16 SDI signals over dual 10GbE or dual 40GbE IP links (dependent on
Ethernet rate, SDI signal format and compressed/uncompressed transport mode).
• Supports configuration of Ethernet links for maximum signal transport using both SFPs, or
for dual link mode to provide link redundancy as per SMPTE 2022-7.
• Multiple transport types available for each SDI input, including:
• Compressed IP transport using SMPTE-2042 (VC2) low latency high quality encoding
profile.
• Uncompressed video transport using either ST2110-20 or SMPTE-2022-6
encapsulation.
• PCM audio using ST2110-30.
• ST2110-40 metadata support.
• Timing and synchronization provided by IEEE-1588v2 (PTP), compliant with SMPTE-2059-2,
or via the IQH3B frame analog reference bus.
• Supports unicast as well as IGMPv3 source-specific multicast, allowing point to point
operation or transmission in multicast groups.
• Standards supported:
• UHD-SDI (4x3G-SDI)
• 3G-SDI to SMPTE 424M/425M level A compatible.
• HD-SDI to SMPTE292M/274M/296M.
• SD-SDI to SMPTE259M-C.
• 40G Ethernet to IEEE 802.3.
• RollCall control and monitoring compatible, with standard logging and reporting features.
IQMIX25/40
User Manual
23
Advertisement
Table of Contents
