RollCall Control Panel
Configuration
Configuration
The Configuration page allows basic module parameters to be set.
Configuration page
The following facilities are available from this page:
Option
SDI IO
Where Am I
Genlock
36
1932
Operation
Displays how input and output spigots are currently
configured. See
information on how to change this.
Causes the front-edge LEDs to flash, allowing the module to
be easily identified.
Select Genlock type:
• Network - click to select PTP. See
below.
• Chassis Reference A/B - click to select an on-chassis
reference.
• Freerun - click to allow free running.
Card Firmware/Software
PTP - An
Version, below, for
Overview,