RollCall Control Panel
Ethernet RTP Receiver Meta Stats
Ethernet RTP Receiver Meta Stats
The RTP Receiver Meta Stats page displays information on the metadata received via RTP on
each Ethernet input. Units are megabits per second.
Click Enable Stats to display the values; click Clear All RTP Counts to zero RTP discontinuity
counters for each Ethernet input.
Ethernet RTP Receiver Meta Stats Page
About Flow IDs
In order to maximize media port bandwidth utilization, if spigot addresses match across
multiple interfaces then they are allocated to the same Flow ID.
This means that if multiple spigots are assigned to the same Flow ID and the IP addresses are
only partially complete, the module will use the shared flow. For example, if two spigots share
the same flow, but one of the spigots is missing from the IP addresses for the secondary
interface, the module will use all of the information available to it and populate information for
the partially completed spigot as if it had a complete flow.
58