RollCall Control Panel
Destination Timing
Destination Timing
The Destination Timing page allows genlock timing on each spigot to be adjusted, in order to
synchronize the IP signal with the house reference.
Destination Timing Page
The following options are available.
Option
Genlock Timing V Offset
Genlock Timing H Offset
Receiver Packet Buffer Frames
Delay
Where N is the input number
62
Description
Vertical timing offset in lines.
Horizontal timing offset in pixels.
The receiver packet buffer provides additional buffering
for a received IP flow. Typically this is required where the IP
flow is bursty in nature. However, increasing buffering can
affect the time required to switch between IP flows at a
spigot, owing to increased switching latency.
Adjust as required.