Rolltrack Command; Rolltrack Sending; Rolltrack Status - GRASS VALLEY IQMIX25 Series User Manual

RollTrack Command

This item enables a command to be sent to the selected destination unit.
The command may be changed by typing a code in to the text field, and then selecting S to
save the selection. Clicking P returns to the default preset command.
A RollTrack command consists of two sets of numbers, for example: 84:156:
• The first number, 84, is the actual RollTrack command.
• The second number, 156, is the value sent with the RollTrack command.

RollTrack Sending

A message is displayed here when the unit is actively sending a RollTrack command. Possible
messages are:
Message
No
Yes

RollTrack Status

A message is displayed here to indicate the status of the currently selected RollTrack index.
Possible RollTrack Status messages are:
RollTrack Source
OK
Unknown
Timeout
Bad
Disabled
Description
The message is not being sent.
The message is being sent.
Description
RollTrack message was sent and received successfully.
RollTrack message has been sent but transmission has not
yet completed.
RollTrack message has been sent but acknowledgment not
received. This could be because the destination unit is not at
the location specified.
RollTrack message has not been correctly acknowledged at
the destination unit. This could be because the destination
unit is not of the type specified.
RollTrack sending is disabled.
IQMIX25/40
User Manual
89